PAXTANI YANGI QUVURLI QURITISH USKUNASINI MODELLASHTIRISH
Keywords:
Quvurli quritgich, isitish suyuqligi, kollektorlar, simulyatsiya.Abstract
Paxta hom ashyosini issiqlik tashuvchi suyuqlikdan foydalanib quvurda quritish jarayoni quritish trubalarining ichida paxta xom ashyosini harakat modeli kollektorlarni joylashuvi hisob ishlari yoritilgan.
References
Ning, B., Wu, H.B., Niu, G., et al. (2022) Cold Compression Deformation Method for reducing Residual Stress and Uniformizing Micro-Property in Ferrite Steel. Journal of Iron and Steel Research International, 29, 503-511 https://doi.org/10.1007/s42243-021-00563-9
Azizov, S.M. and Axmedhodjaev, X.T. (2016) The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin. American Journal of Mechanical and Industrial Engineering, 1, 103-106.
https://doi:10.11648/j.ajmie.20160103.2
Wang, Y.D., Zhang, L.F., Yang, W., et al. (2022) Effect of Nozzle Type on Fluid Flow, Solidification, and Solute Transport in Mold with Mold Electromagnetic Stirring. Journal of Iron and Steel Research International, 29, 237-2 46. https://doi.org/10.1007/s42243-021-00577-3
Azizov, S.M. and Axmedhodjaev, H. (2015) Theoretical Analysis of Gin Cylinder for Simulating Dual Saw Cylinder Chamber Gin for Increasing Wear Proof, Energy Efficient, Saving Resources. World Journal of Engineering and Technology, 3, 91-99.
Jiang, D.B., Zhang, L.F. and Wang, Y.D. (2022) Effect of Mold Electromagnetic Stirring on Solidification Structure and Solute Segregation in Continuous Casting Bloom. Journal of Iron and Steel Research International, 29, 124-131.
Azizov, S., Ibrohimov, M., Uzoqov, F. and Mirzakarimov, M. (2021) The Modelling and Introductions of New Type Ribs of Lattice of the Two Cylinder of Gin. E3S Web of Conferences, 273, Article ID: 07020.
https://doi.org/10.1051/e3sconf/202127307020
https://doi.org/10.1007/s42243-021-00702-2
Briseno, J. and Casanova-del-Angel, F. (2021) Fracture Mechanics on Aluminum Specimens. World Journal of Mechanics, 11, 237-257.
https://doi.org/10.4236/wjm.2021.1112016
Mamatovich, A.S. and Abdusamat, K. (2011) Definition of Increasing the Fibre Capturing Surface of Saw Teeth of Cotton Ginning Machine through Mathematic Modelling. World Journal of Mechanics, 1, 122-126.
https://doi.org/10.4236/wjm.2011.13017
Azizov, S., Uzoqov, F., Mirzakarimov, M. and Usmanov, O. (2021) Analysis of Namangan 77 Cotton in Production Line with Different Saw Gins for Short Fiber Yield. E3S Web of Conferences, 273, Article ID: 07021.
https://doi.org/10.4236/wjm.2011.13017
Azizov, S.M. (2022) Calculation Energy of Efficiency New Ginning Machine. Journal: Engineering, 14, 163-172.
https://doi.org/10.4236/eng.2022.144016
Mamatovich, A.S., Abdusamat, K. and Arras, P. (2013) The Mathematical Simulation of Brush Drums in a Dual Saw Cylinder Chamber Gin for the Purpose of Increasing the Quantity of Captured Cotton Fiber from Saw. World Journal of Mechanics, 3, 58-61.
https://doi.org/10.4236/wjm.2013.31004
Azizov, S. M., & Uzoqov, F. G. (2023). Kolosnik matritsa modelini raqamli uskuna yordamida tayyorlash ketma ketligini loyihalash. Research and Education, 2(1), 159–168.
Retrieved from https://researchedu.org/index.php/re/article/view/1351
