SEISMIC DESIGN CODES AND STANDARDS: LEARNING FROM FOREIGN EXPERTISE TO ENHANCE SEISMIC PERFORMANCE OF MULTI-STORY FRAME BUILDINGS

Authors

  • R.R Yusupov Tashkent University of Architecture and Civil Engineering, Uzbekistan
  • J.I Makhmudov Exchange student at Hongik University, South Korea

Keywords:

Seismic design codes, Standards, Earthquake-resistant design, Multi-story frame buildings, Seismic performance, structural systems, foundation design, construction techniques, Building Standard Law, AIJ Guidelines, International Building Code (IBC), ASCE 7, NZS 1170.5, Ductile detailing, Performance-based design, Site-specific hazard analysis, Retrofitting strategies, Design optimization.

Abstract

This article explores the seismic design codes and standards used in foreign regions known for their expertise in earthquake-resistant design and discusses how they can be applied to enhance the seismic performance of multi-story frame buildings in a specific study area. It highlights notable foreign regions with advanced seismic design practices, examines key features of their codes and standards, and suggests potential applications in the study area. The article emphasizes retrofitting strategies, design optimization, and knowledge transfer as means to improve seismic resilience.

References

Takada, S., & Dhakal, R. P. (2018). Seismic design practice in Japan: Evolution and future trends. Frontiers in Built Environment, 4, 41. doi: 10.3389/fbuil.2018.00041

Federal Emergency Management Agency. (2015). NEHRP Recommended Seismic Provisions for New Buildings and Other Structures (FEMA P-1050). Retrieved from https://www.fema.gov/media-library/assets/documents/32230

New Zealand Society for Earthquake Engineering. (2004). New Zealand Standard NZS 1170.5:2004 - Structural design actions - Part 5: Earthquake actions - New Zealand. Wellington, New Zealand: Standards New Zealand.

Sociedad Chilena de Ingeniería Sísmica. (2012). NCh433 Of 1996 - Seismic Design of Buildings. Santiago, Chile: Instituto Nacional de Normalización.

Ministero delle Infrastrutture e dei Trasporti. (2018). NTC 2018 - Norme Tecniche per le Costruzioni. Rome, Italy: Governo Italiano.

Naeim, F., & Kelly, J. M. (1999). Design of Seismic-Resistant Steel Building Structures. Reston, VA: American Society of Civil Engineers.

Downloads

Published

2023-06-05

How to Cite

Yusupov , R., & Makhmudov , J. (2023). SEISMIC DESIGN CODES AND STANDARDS: LEARNING FROM FOREIGN EXPERTISE TO ENHANCE SEISMIC PERFORMANCE OF MULTI-STORY FRAME BUILDINGS. GOLDEN BRAIN, 1(15), 320–327. Retrieved from https://researchedu.org/index.php/goldenbrain/article/view/3818

Issue

Vol. 1 No. 15 (2023): GOLDEN BRAIN

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.